How To Improve The Bending Shape And Bending Section Of Stainless Steel Elbows

How to improve the bending shape and bending section of stainless steel elbows? The pipe mouth of the stainless steel elbow is provided with an inner lining, part of which is located inside the pipe mouth and fixedly connected to the inner wall of the wide mouth, and the other part of the inner lining is located outside the pipe mouth. The inner lining of the product located outside the pipe mouth is provided with a cutout. When the Stainless Steel Weld Elbow is connected to the stainless steel pipe, it is easy to dock and install, which can eliminate the tension generated by the pipe connection, has strong anti-deformation ability, and after welding, the connection will not deform after long-term use, and the installation and decoration effect is good.

Stainless steel elbows involve the field of architectural decoration, and the technical points are: including an elbow body, the elbow body of the product includes a curved bending section and a straight line section connected to the two ends of the bending section, and also includes an arc-shaped anti-bending part, and the two ends of the bending section of the product are connected by the anti-bending part, and the two form a hollow. Through the setting of the anti-bending part, the anti-bending performance of the elbow body is enhanced, thereby also increasing the service life of the elbow body.