Stainless Steel Pipe Fittings Are Used And Promoted In Different Regions And Industries

Stainless steel pipe fittings are used and promoted in different regions and industries. They can adjust the quality of water and are used in different places to play an important role. They have excellent mechanical and physical properties. The stainless steel compression type equal diameter tee is twice that of the galvanized pipe, three times that of the copper pipe, and 8-10 times that of the PP-R pipe. It can withstand vibration and shock very well. After it is connected, it has the characteristics of no leakage, no bursting, and earthquake resistance. Therefore; at the same time, it has good thermal insulation performance and is particularly suitable for hot water transportation, playing an important linking role. The common processing techniques of stainless steel elbows are mainly the following: 1. CSP continuous casting and rolling 2. Steckel rolling mill 3. Semi-continuous rolling mill 4. Medium and thick plate unit stainless steel elbows should be used and maintained in an accurate and reasonable manner. The precautions are as follows:

1. When using the ball valve, stop valve, and gate valve of Stainless Steel Weld Elbow, they can only be fully opened or fully closed, and are not allowed to be used to adjust the flow, so as to avoid erosion of the sealing surface and accelerated wear. There is an inverted sealing device in the gate valve and the upper threaded stop valve. The handwheel is rotated and tightened to prevent the medium from leaking from the packing.

2. Stainless steel elbows that are stored for a long time should be inspected regularly, and the exposed processing surface should be kept clean and free of dirt. They should be stored neatly in a ventilated and dry place indoors. Stacking or outdoor storage is strictly prohibited. Always keep the stainless steel elbows dry and ventilated, keep the device clean and tidy, and store them according to the correct storage method.

3. During installation, the stainless steel elbow can be directly installed on the pipeline according to the connection method and installed according to the location of use. Under normal circumstances, it can be installed at any position of the pipeline, but it needs to be easy to operate. Inspection, pay attention to the flow direction of the stainless steel elbow medium should be from the bottom of the longitudinal valve disc, and the stainless steel elbow can only be installed horizontally. When installing the stainless steel elbow, pay attention to the sealing to prevent leakage and affect the normal operation of the pipeline.