Stainless Steel Flange production process: the butt welding flange material liquid enters the die close to the cross-section of the inner glue port, hits the mold wall of the opposite door, expands along the mold wall there and then returns to the glue mouth, flowing on the metal material The second step is: the metal igneous rock that enters then fills the surface of the shell. The excited stacked metal material surrounds the key expansion and integration of the link.

 The fast-flowing metal top layer extends to the front edge and rotates around the instantaneous rotation center in the fluid. When the fluidity of the butt welding flange material stops, it collides with the surface of the die with a large force, and the rotation center moves within this layer in a manner consistent with the average speed in the fluid. The butt welding flange of the stainless steel pipe in this layer has a small amount of movement in the vertical direction of the fluid flow.

 Rotating around this center, the metal material is gradually sent from the top layer to the next layer, thus roughly maintaining the thickness of the liquid skin until it is completely covered. The skin that begins to form is at the temperature around the SSD line in the second stage. The third stage: After the metal liquid completely fills the mold wall, the mold, pouring system and pressure chamber are closed. Hydraulic system, in which the pressure of each part of the system is the same, the injection force makes the metal material in the liquid continue to function through the casting center.